When the original PK Ripper burst onto the scene in 1979, it took the BMX world by storm & set a new benchmark for radness. Here we are now 40+ years later and it’s happening again with the new SE Racing 2020 Perry Kramer PK Ripper 27.5+ BMX Bike-Silver, designed by the man himself, the PK of “PK Ripper”, Perry Kramer. This ultra-cool bike features tubeless ready 27.5” x 2.5” Vee Speedster tires, sealed internal headset, internal cable routing, SRAM Level hydraulic disk brakes, Oakley B-1B grips, and of course Perry’s stamp of approval. This is the PK of the future!
KEY FEATURES
- Perry Kramer replica 6061 aluminum PK Ripper frame w/ floval tubing, seatstays wrap, internal cable routing, and looptail rear end
- Full Cr-Mo Landing Gear forks with disc tabs
- SE Racing forged alloy 2-piece cranks with 24mm hollow alloy spindle, external sealed bearing bottom bracket and alloy chainring
- SRAM Level hydraulic disc brakes with 2-piston caliper and SRAM Direct Link levers
- Tubeless compatible Alex DP30 rims with Vee Speedster 27.5 x 2.5” tires, tubeless valves and tubeless rim tape included.
- Oakley B-1B Grips with Perry Kramer Donuts
- Perry Kramer Flyer Seat with SE bottle opener
- SE Racing snap padset
- Custom Perry Kramer PK Ripper sticker sheet
- 31.2 pounds
SPECIFICATIONS
- SUGGESTED RIDER SIZE: 5’3″+ (160cm+)
- COLOR(S): High Polish Silver
- FRAME: 6061 Aluminum Floval Tubing, Internally-machined Integrated Head Tube, Symmetrical Looptail Rear End, 73mm Euro Bottom Bracket, 142mm Spaced Dropouts, Internal Cable Routing on Top Tube, Disc Brake Tabs
- FORK: Landing Gear, Full Cr-Mo, 419mm Axle to Crown, 29mm Offset, 110mm Spaced Dropouts
- CRANKSET: SE Racing 175mm Forged Alloy 2-pc Cranks, External Sealed Euro Bottom Bracket, 24mm Hollow Alloy Spindle, 39T Alloy Chainring
- PEDALS: X-Pedo Low-profile Platform w/ Removable Pins
- CHAIN: KMC S1
- WHEELSET: Alloy 36H Nutted Hubs, Sealed Rear, 110mm Front Hub & 142mm Rear Hub, w/ Alex DP30 Tubeless Compatible, Double-Wall Disc Rims, 17T Cassette, Stainless Spokes, Tubeless Valves, Tubeless Rim Tape
- TIRES: Vee Tire Co x SE Racing Speedster, Tubeless Ready, Folding, 72TPI, 27.5 x 2.5″ Front & Rear
- BRAKESET: SRAM Level, Hydraulic Disc, 2-Piston Caliper, 160mm Rotor, Expandable Bladder, Timing Port Closure, DOT 5.1 Fluid
- BRAKE LEVERS: SRAM Direct Link Level, Alloy
- HEADSET: FSA Orbit CE, Sealed 1-1/8″ Integrated
- HANDLEBAR: Big Honkin’ Cr-Mo Cruiser Bar, 29″ x 7″, 12° Backsweep, 2° Upsweep
- STEM: Retro Alloy Top-Load w/ Engraved SE Logo on Top & Sides, 55mm Reach
- GRIPS: Oakley B-1B, Made in USA, w/ Perry Kramer Donuts
- SEAT: Perry Kramer SE Flyer Seat w/ Custom SE Bottle Opener Brace
- SEATPOST: Micro-Adjust Alloy, 27.2mm
- SEAT CLAMP: Promax Quick Release Seat Clamp, 31.8mm Inner Diameter
- ACCESSORIES: SE Racing Snap Padset, Alloy Valve Caps, Custom Perry Kramer PK Ripper 27.5 Sticker Sheet, SE Chain Tensioners, Tubeless Valves, Tubeless Rim Tape
- WEIGHT: 33.1 lbs / 15.01 kgs
*Specifications subject to change without notice
GEOMETRY
- TOP TUBE, ACTUAL: 22.8″
- SEAT TUBE, CENTER TO TOP: 15.7″
- SEAT TUBE ANGLE: 73°
- HEAD TUBE ANGLE: 71°
- CHAINSTAY LENGTH: 17.4″
- WHEELBASE: 42.7″
- BOTTOM BRACKET HEIGHT: 11.9″
- STANDOVER: 29.5″
- STEM: 55mm
- HANDLEBAR WIDTH: 29″
- CRANK: 175mm
- WHEEL SIZE: 27.5
- SEAT POST DIAMETER: 27.2mm